This is a guest post from a lady named Aurelia “AJ” Julianne. She submitted this post to help build links to her website. We decided to publish it because we think there is some value to this mold removal post.

Mold is a natural component of our ecosystem. In an outdoor environment, it plays a crucial role in depleting dead organic matter, like leaves and trees. Unfortunately, if you discover mold inside your home, then you’ve got yourself a problem.

If improperly addressed, it can inflict severe damage to your home plus cause health problems for your family. Mold if left unchecked, may induce allergens, irritants, and, in severe cases, toxic substances.

Here is a quick roundup of easy and effective solutions for removing this harmful fungus:

1.      Repeatedly Wash with Soapy Water

Prior to applying any treatment in the area, it is first advisable to wash it with soapy water. At the first sight of mold, scrape it with a scrubber or a brush.

Once removed, wash the portion with soapy water. You can use detergents to wash away the mold. Remember to continuously wash surfaces to prevent regrowth.

2.      Treat the Area with Tea Tree Oil

Did you know that tea tree oil is a natural antimicrobial that kills mold? Aside from containing antifungal properties which eventually destroy mold, it also keeps mold from recurring in problem areas after using it just once.

To make your simple solution, combine 100 ml each of tea tree oil and vinegar. Mix this with 500 ml of water, and transfer your solution to a spray bottle.  As previously mentioned, always scrub mold first and wash with soapy water before starting any treatment. Continue the treatment every five hours until the mold is completely gone.

3.      Apply Vinegar to the Affected Surfaces

Another superb fungicide is regular old vinegar. What is great about this natural wonder is that it doesn’t stain walls after treatment. Besides that, it doesn’t carry any risky side effects. To start treatment, mix equal parts of distilled vinegar and water in a spray bottle.

Once the surface is scrubbed and washed, spray on the vinegar solution then wipe it clean. You may pour vinegar directly on tougher areas, but do not rinse it off.

4.      Seal Tile and Grout

The bathroom typically has a humid environment which is perfectly suited for mold development. By efficiently sealing your tile and grout, you discourage stubborn mold build-up caused by extreme moisture.

Most home improvement stores sell organic tile and grout sealant that you can purchase and easily apply yourself.

5.      Control Indoor Moisture

The primary factor in stopping mold growth is effectively controlling moisture. Mold multiplies by way of tiny spores. Incidentally, these spores are unseen by the naked eye. They float through the air and may start to spread when they land on moist surfaces.

To prevent mold growth, make sure to routinely clean areas in your home where it ordinarily appears. Keep in mind to always keep dry the areas of your house where mold is commonly found. Additionally, regularly stretch out wet shower curtains and instantly dry soaked clothing.

Been noticing that your basement is usually dank? It is possible that there are cracks in the wall allowing moisture in. Fill in those cracks and arrange for ample outside drainage.

Using an air conditioner or dehumidifier can also decrease indoor moisture. Or, an air purifier can be used to remove mold spores. To actively boost air circulation inside your home, open up your windows and use electric fans when possible to push moisture out.

Air purifiers with HEPA filters can help remove mold spores. Photo Courtesy of Rowenta

6.      Remedy with Cleaning Agents

You can also use the following cleaning agents to treat mold:

Ammonia

Like bleach, ammonia is a dangerous chemical and should be handled carefully. Take note that this solution should not be used on porous surfaces. When treating mold, remember to use clear ammonia.

To create your solution, mix equal parts of clear ammonia and water then begin spraying it on affected surfaces. Leave it for a couple of hours, then wipe and rinse.

Baking Soda

Baking soda is a deodorizing agent which is gentle and safe. Since it is mild, you can use this on porous surfaces. To make your solution, mix 2 tablespoons of baking soda and 8 ounces of water.

Scrub the affected area first, and then spray your solution and rinse. After a while, spray again, but this time, do not rinse.

7.      Cure Spots with Grapefruit Extract

If you are sensitive to scents, you can try treating mold with grapefruit extract. This natural solution does not give out any acidic scent and is basically odorless. With that said, it is safe to use, even with kids around.

In a spray bottle, mix 20 drops of grapefruit extract and 2 cups of water. Spray problem areas and do not rinse.

8.      Spray with Distilled Ethanol

Alcohols, such as vodka, may be readily used to remove mold. The alcohol in the liquor is minimally processed which makes it potent for mold removal.

Spray the alcohol directly on the affected surface after scrubbing the mold. Rinse thoroughly after treatment. It is recommended to leave a light coat of spray on the moldy surface to avoid further mold growth.

9.      Coat the Region with Varnish

Wood attracts mold. If you see mold growing on the surface, get rid of it as quickly as you can. Scrape the mold first, and then, apply varnish to diligently eliminate it.

As an agent, varnish is beneficial in getting rid of mold and it reduces regrowth occurrences. As an added bonus, applying it to wood makes it look as good as new for a longer period of time.

10.  Enlist the Help of a Professional

When all else fails, get professional mold removal services. This is a sensible and wise move, especially when your home has an incessant infestation.

Take your time to research the most reputable mold remediation specialist in your area. When searching for a qualified professional, make sure to ask for a written quote and guarantee.

Do you have tips for getting rid of uninvited household mold? Share them below!